Other
$14.99
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$11.99 - $12.00
- Chromoly steel
- CNC fabrication
- 1.29" x 24tpi left hand thread
$15.00
Snap-on brake cable guides for bikes that don't have any.
- Steel cable housing guide for 1-1/8" top tubes
- Snaps on; no bolts
- Set of 3 clamps
$23.99
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$29.99
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$5.99
Campagnolo small parts for bottom brackets.
$59.99
Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals.
- Kit includes 2 bearings and 2 seals
$19.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$9.99
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Service Kit - 3-Pawl
$19.99
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6902 Bearing
$23.99
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6802 Bearing
$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$29.99
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
$9.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$10.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$24.00 - $29.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$27.99
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$29.99
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$11.99
This is an FSA Self Extracting Crank Bolt for Hollow Carbon MegaExo Light Cranks
- Designed to fit hollow carbon FSA cranks only
- Includes M17 bolt, M27 self-extracting cap, and washers
$13.99
FSA Crank Arm Fixing Bolts
- Self-extracting crank bolt
- 15mm
$14.99
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M17 bolt, M27 self-extracting cap, and washers
$15.00
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M12 bolt, M27 self-extracting cap, and washers
$19.99
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander.
- Includes cap, bolt and expander
- Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$26.99
FSA Standard Headset Bearings
$11.99
-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)
$15.00
-1-1/4" headset spacer kit with following sizes: 2.5mm(x1) .5mm(x2) 10mm(x2)
$23.99
Features
- Replacement saddle clamp for pre 2016 Contact Switch seatposts
- Available in 7mm for alloy rails or 9mm for carbon rails
- Clamps seat rails to seatpost
Page 1 of 5
Next page