Shop Gear

The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included

iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.

absoluteBLACK Oval 96 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for use with Shimano XTR M9000 and M9020 cranks only. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Shimano XTR M9000 and M9020 cranks - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Rings have built-in threads for ease of mounting and reduction in weight - Not compatible with Shimano XT M8000 cranks

absoluteBLACK Round 104/64 BCD Chainrings are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - The chainring's offset helps to create an ideal chainline - Provides exceptional reliability, weight savings, and stiffness - 9, 10, 11, and 12-speed Eagle compatible - Use with absoluteBLACK short chainring bolts

absoluteBLACK Round 96 BCD 1x Chainrings feature a specially designed narrow-wide tooth profile that keeps the chain snug. They are designed for use with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks only. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Fit boost and non-boost bikes as correct offset is realized by the crank spider itself, not chainring - Chainrings have built-in standoffs to provide an ideal 1X chainline - For 49mm chainline - Only use the included extra-long chainring bolts

Enjoy the lightweight protection in our Divine glove. - Synthetic leather palm - Breathable mesh back hand - Slip-on glove with spandex cuff - 55% Synthetic Leather / 45% Nylon - UPF 50+

Fundamental comfort for all types of rides Our Essential Liner cushions your ride for mountain biking, road or gravel cycling, and even spinning. Versatile to wear under any shorts or pants. The ergonomic foam offers well-placed support that won't bunch or bulge like gel pads. PAD YOUR ASSETS! Wear ZOIC padded cycling liners to make any short a bike short. These inner shorts provide cushion and comfort for bike rides of any duration. Our cycling liners are categorized by ride time, based upon thickness of the chamois pad and how soft or firm the foam is, to help you choose the liner you need. - 9" inseam - 6 panel construction for performance fit - 88% Polyester,12% Spandex Essential Liner Shell: - Spandex fabric provides stretch, breathability, and wicking - Revolutionary Quick Relief Fly - Quick Draw Pocket on the right thigh, ideal for bars & gels - Reverse stitching places seams away from the body to reduce chafing - Plush elastic on waistband and leg openings is soft against the skin - Tagless labels for a clean fit Essential Chamois Pad: - Medium density foam provides consistent support - Multi-level anatomic shape with 4-way stretch - ZO-Wick moisture management keeps you dry - Made in China

Everything your little shredder needs. Same great short in a small package. - DuraFlex fabric stretches when you move and resists abrasion - Fusion Inseam Gusset ensures superior range of motion and eliminates seat hang-ups - Integrated Air Flow mesh ventilation panels below back waistband and down legs - 6 pockets provide convenient storage - Active Access cargo pocket placement - Tagless labels eliminate itching and irritation - Liner not included - Elastic back waistband and side adjusters give him room to grow - 8.75" Inseam (Size Large) - Shell: 95% Polyester/5% Spandex - Gusset: 87% Nylon, 13% Spandex - UPF 50+

The Ether short checks all the boxes, style, comfort, and function. These shorts are packed with features that make them the go-to short for any avid trail rider or weekend warrior. - DuraFlex fabric stretches when you move and resists abrasion - Fusion Inseam Gusset ensures superior range of motion and eliminates seat hang-ups - Integrated Air Flow mesh ventilation panels below back waistband and down legs - 6 pockets provide convenient storage - Active Access cargo pocket placement - Tagless labels eliminate itching and irritation - Liner not included - 12" Inseam falls just at the knees - Elastic back waistband and hook-and-loop side-adjuster tabs for a personal fit - Secures with snap and zip fly closure - Shell: 95% Polyester/5% Spandex - UPF 50+ - Gusset: 87% Nylon, 13% Spandex

Kids who spend a lot of time on their bikes are just as concerned about comfort as adults. Our Kidz Komfy liner features a mesh spandex shell with a molded foam chamois pad to keep your child smiling in the saddle - NEW! Multi-level foam chamois enhances padding - 6-panel short construction ensures a performance fit - Wide and comfortable knit elastic on inside leg opening - ZO-Wick moisture-transfer fabrics keep you dry - Tagless waistline - Youth-specific fit - Unisex

Elastic waist and cuffs keep the jersey in place so it wears the way you move. Three large rear pockets keep your stuff out of your way so you can keep just dig in and enjoy the ride. By the way, the cut is designed for cycling; no sense going to all this trouble and then having it fit like some crummy t-shirt! 100% DrySport Polyester Wicking Fabric 19? Hidden Zipper High-tech Heat Sublimation Printing Elastic Waist and Cuffs Cycling Cut Three Back Pockets

REPRESENT WHILE YOU RIDE in these officially licensed cycling socks from Adrenaline Promotions. Made for Adrenaline by SockGuy, these cycling socks come with a 5" top cuff knit with lycra nylon to eliminate sagging; reinforced heels and toes extend life in high abrasion areas and are nylon plated to outside of foot sole for lasting durability. CoolMax® EcoMade plated to the inside of foot for maximum moisture transport. Mesh weave instep is lightweight and speeds drying. Great technical comfort to coordinate with your Adrenaline jersey!

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

- Anodized aluminum - 50 nipples per bag - 12mm length

Tub of 25 Grade 25, 1/4" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

- 4, 5, & 6mm stainless steel fastener kit - Includes socket cap screws, flat socket cap screws, flat washers, lockwashers, plain nuts, and locking nuts - 218 Pieces Kit contains: - M4 X 8 Socket Head Cap qty. 8 - M4 X 16 Socket Head Cap qty. 8 - M4 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Socket Head Cap qty. 12 - M5 X 10 Socket Head Cap qty. 12 - M5 x 8 Socket Head Cap qty. 12 - M5 X 16 Socket Head Cap qty. 8 - M5 X 16 Button Socket Head qty. 16 - M5 X 25 Socket Head Cap qty. 4 - M5 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Flat Socket Head Cap qty. 8 - M5 X 16 Flat Socket Head Cap qty. 8 - M6 X 20 Socket Head Cap qty. 2 - M6 X 35 Socket Head Cap qty. 2 - M6 X 45 Socket Head Cap qty. 2 - M4 Flat Washer qty. 8 - M5 Hex Nut qty. 20 - M5 Nylock Nut qty. 10 - M5 Flat Washer qty. 20 - M5 Lockwasher qty. 20 - M6 Hex Nut qty. 8 - M6 Nylock Hex Nut qty. 6 - M6 Flat Washer qty. 8 - M6 Lockwasher qty. 8

Tub of 75 Grade 25, 5/32" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 75 per tub

- Zinc plated for durability - All screws grade 12.9 - 310 Pieces Kit contains: - M6 X 12 Socket Head Cap qty. 15 - M6 X 16 Socket Head Cap qty. 25 - M6 X 20 Socket Head Cap qty. 25 - M6 X 25 Socket Head Cap qty. 15 - M6 X 35 Socket Head Cap qty. 5 - M6 Nut qty. 50 - M6 Nylock Nut qty. 50 - M6 Flat Washer qty. 50 - M6 Oversized Flat Washer qty. 50 - M6 Lockwasher qty. 25

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables